Measurements for a Reveal/Recess Fitted Roller Fly Screen for Doors - Single

For this screen you will need to measure the full width and height of the door reveal/recess. These need to be tight 

measurements to ensure the best fit.

Width

Measure between the two side walls at the top and bottom of the reveal - this is tracks will be fitted.

Height

Measure between the underside of the top sill (brick work) and the door sill or floor. Take measurements on

both the left and right - this is where the cassette head and closing post will be fitted.

Enter these measurements into the boxes to confirm your price. Your screen will be cut, so that when fitted,

the overall screen size will match your dimensions.

Please note:

This screen system will accommodate small variances of width from top to bottom and height from left to right.

If these variances exceed 10mm you may need to ‘pack’ out to ensure the variances fall within the 10mm limitations.

Please call if you need advice with this.

Measurements for a Face Fitted Roller Fly Screen for Doors - Single

The size we require is the Height and Width as per both drawings.

We will make your screen to these sizes and make allowances for brackets etc.

Please note: the cassette with face fitting bracket is 61mm wide, the top guide is 40mm high and the bottom guide is 22mm high