
Measurements for a Reveal/Recess Fitted Roller Fly Screen
To fit this screen into a reveal you will need to measure the full
width and height of the window reveal/recess. These need to be tight
measurements to ensure the best fit.
Width
Measure between the two side walls at the top of the reveal
- this is where the cassette head will be fitted.
Height
Measure between the underside of the top sill (brick work)
and the window sill. Take measurements on the left and
right and use the shortest measurement.
Please note:
This screen system will accommodate small variances of width from top to bottom and height from left to right. If these variances
exceed 10mm you may need to ‘pack’ out to ensure the variances fall within the 10mm limitations.
Please call if you need advice with this.
Measurements for a Face Fitted Roller Fly Screen


The size we require is the Height and Width as per both drawings.
We will make your screen to these sizes and make allowances for brackets etc.
Please note:
The head cassette with face fitting bracket is 61mm from top to bottom. The side guides are 40mm wide.